List Price : $169.95 Price : $122.33
Product Description
The ScanGaugeII is a compact vehicle computer that connects to the diagnostic connector in seconds and gives you an extensive trip computer, real time gauges and trouble code reader. It can read fuel economy as you drive, tell you how fast your friend drove your car last night, tell you when you are going to run out of fuel and dozens of other functions. Installation takes only seconds and requires no tools. It can be moved from car to car. Works on gas, diesel, propane, and hybrid vehicles. The ScanGaugeII works on all OBDII protocols including the new CAN protocol.
Amazon.com
The ScanGaugeII is a 3-in-1 automotive computer that combines a multifunction trip computer, diagnostic scan tool, and up to 37 digital gauges in one small package. It connects easily to your vehicle's On-Board Diagnostic (OBDII) port and communicates directly with the vehicle's computer. Not sure if your car uses OBDII or Controller Area Network (CAN)? The unit will automatically determine which system to use and switch to it. The ScanGaugeII works on all 1996 or newer OBDII cars, including gas, diesel, propane and hybrid vehicles, as well as vehicles with the latest CAN systems. A detachable cable allows for easy transfer between multiple vehicles. Its menu-driven operation means there's no need to memorize complex sequences, and no tools are required for installation.
Expandable Add-A-Gauge Technology
The ScanGaugeII has been redesigned with expandable Add-A-Gauge (aka XGauge) technology. Add to the original 12 gauges by customizing the ScanGaugeII to monitor up to 25 more--depending on your specific vehicle's sensor design. Four gauges can be displayed simultaneously and can help determine fuel consumption rates, allowing you to adjust driving behavior and save gas. At the same time, keep an eye on coolant temperature, engine speed, and much more in real time. If there is a young driver in the house or friends borrow your car, the ScanGaugeII can record speeds of up to 158 mph and store the information for you to view later, so you will know just how fast your young driver or friend was going last night. If the unit was disconnected, you'll know: An indicator will be displayed in the trip data.
 ScanGaugeII mounts easily to your dash. |
Gauges include:
- Horsepower
- Fuel Consumption Rate to 1/100th per gallon/liter
- Vehicle speed (MPH)
- Fuel Economy
- Cost Per Mile/Cost Per Trip
- Manifold Pressure (not available on some vehicles)
- Battery Voltage
- Engine Load
- Coolant Temperature
- Throttle Position
- Intake Air Temperature
- Ignition Timing
- Engine Speed (RPM)
- O2 Sensor Data
- Fuel Trim
- Hybrid Battery Charge (for Toyota Prius and Ford Escape)
- And many more, depending on your vehicle's sensor design
 ScanGaugeII makes diagnostics easy. View Larger |
The ScanGaugeII includes a diagnostic scan tool that can check for Diagnostic Trouble Codes (DTCs), clear the codes, and turn off the "Check Engine" light on 99% of 1996 and newer vehicles. (However, this feature may not work on some trouble codes in Dodge vehicles.) If any DTCs are found, the ScanGauge will show how many there are as well as the codes themselves. Then you can use the Internet or repair manual to find out which is the failed part is, so you can repair it yourself or know what needs to be fixed at the mechanic's shop.
Multifunction Trip Computer
Four sets of data are automatically recorded on the trip computer: Current, Today, Previous Day, and Tank Trip. The "current" trip restarts after the engine has been off for more than 3 minutes. The "today" trip restarts after the vehicle has not moved for 9 hours, and the data from "today" is moved to "previous day" when you restart the car, so you don't have to reset the computer every time you begin a trip. "Tank trip" resets when you fill up the tank. It can provide you with "to empty" data and other useful information, which can be viewed any time during the trip. The trip computer also integrates information from the Cost Per Mile gauge. Simply enter how much you paid per gallon or liter of fuel, and the ScanGauge will automatically calculate the cost of your trips as you drive. The ScanGaugeII features 12 individually stored parameters, including:
 ScanGaugeII features 63 backlit colors. View Larger |
- Maximum Speed
- Average Speed
- Maximum Coolant Temperature
- Maximum RPM
- Driving Time
- Driving Distance
- Fuel Used
- Fuel Cost
- Trip Fuel Economy
- Distance to Empty
- Time to Empty
- Fuel to Empty
A large, high-contrast LCD display makes viewing the information easy, and both the display and keys are backlit and can be set to off, low, or high. With 63 possible colors, user settings, tank trip data, and vehicle settings that are automatically saved, and up to 10 user commands that can be stored and recalled, the ScanGaugeII can be easily customized to suit your needs.
- Programmable 3-in-1 automotive trip computer, diagnostic scan tool, and up to 37 digital gauges in one (vehicle dependent)
- Watch fuel consumption, cost-per-mile, coolant temperature, engine speed, horsepower, and much more in real time
- Works on all 1996 or newer OBDII cars, including gas, diesel, propane and hybrid vehicles
- Checks for Diagnostic Trouble Codes (DTCs), clears the codes, and can turn off the "Check Engine" light
- No tools required for installation, small size fits nearly anywhere in the vehicle
ScanGauge II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital GaugesCustomer Review
ScanGauge II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges Reviews
| 154 of 167 people found the following review helpful:  High Utility Factor, Intuitive Interface, but has bugs and issues, By Amazon Verified Purchase This review is from: ScanGauge II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges (Automotive) The installation of the SG2 is simple: attach the OBD2 connector to the DLC port and attach the RJ-45 jack to the SG2 unit. Routing the cable is really up to the operator. I chose to do it in a crude manner because I don't plan to make it a permanent addition to the car. I zip tied the cable to my HVAC vents and anchored it to the empty traction control hole behind the glove box. I used 1 of the provided velcro kits to affix the SG2 to the top of my steering column so that it is right below the instrument panel. It actually blocks my view of the shift indicator array, although I can still see it clearly if I lean forward. The update rate set at FAST is still rather slow and that is to be expected with the outdated OBD-II network. The "fastest" aftermarket scan tool that I have seen is SCT's Live Link for Ford / GM / Chryslers. If you want anything faster, you are going to have to borrow an OEM's scan tool system. The X-Gauge interface is a bit... Read more 79 of 84 people found the following review helpful:  gives you all the information you want/need, By This review is from: ScanGauge II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges (Automotive) This little box is very useful. In my case it already paid for itself. I was able to clear some service codes (misfire of a cylinder). In the past I paid $69 for the mechanic to just look up and clear the code. I really like the fact that ScanGauge displays all kinds of engine data in real time. Other devices such as the CarChip save it and then need to be connected to a computer in order to access the data. In my opinion, the ScanGauge is worth every cent. 53 of 55 people found the following review helpful:  Be more knowledgeable about your car, By This review is from: ScanGauge II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges (Automotive) Being a geek, I bought the ScanGauge II so that I could see more information in real time about my car. The ScanGauge should appeal to anyone who watched Night Rider and was envious of all the cool displays inside Kit. The good news is that this little device does give you so much more cool information about your car as you drive. Rather than guess why your car had bad mileage, you can tell immediately it was because you had the throttle down too much or your average speed was 85 mph. The real value of this gadget is that it gives you hard data to point to when your car acts a little funny. The first thing you'll have to figure out is where to mount it. I drive a RAV4, and I've found the best place is under the center console. It stays out of the way and gives your passengers something cool to look at while you're driving. I would not recommend putting it in your line of site, like a HUD in an F-16. The numbers will distract you and then you'll have bigger... Read more |
› See all 324 customer reviews...
No comments:
Post a Comment